CNC milling

CNC milling
In CNC milling machines with up to five axes can be programmed via machine control. The axes are regulated individually or at the same time with feeds. The travelling distances are measured by means of glass measuring blocks. We differentiate between incremental and absolute travelling distance measuring systems. CNC milling machines run sometimes with extreme feeds of 60 m/min and rotational speed of 100,000/min, the values are however usually clearly below. The tools are stored in a tool changer magazine, they are automatically recalled when required and changed by means of a tool changer. The CNC technique allows 3D milling which allows production of more complicated 3D contours. The work piece is frequently started in many small rows that are positioned next to each other. In five axis milling the machine can position and move the milling cutter on the work piece in any angle; with this the production of extremely complex 3 D contours is possible. The work room coordinates are the characteristics of a milling machine, i.e. which travelling distance is possible in coordinates X, Y and Z, which input power and which rpm range is available.

Our company works predominantly with modern, precise milling machines of the Californian manufacturer HAAS. Due to comprehensive and varied machinery we are in a position to provide turning parts and milling parts with toothing completely from one source.
HAAS VF-4SS-EU
The Gleser GmbH complemented its machinery to a vertical super-speed machining center of the type HAAS VF-4SS-EU. For even higher quality and even greater efficiency for processing your goods.



HAAS VF-4SS-EU

Vertical Super-Speed Machining Center: 50" x 20" x 25", SK-40-spindle, 30-hp-vector drive, 12,000 rpm, inline-direct drive, arranged laterally "high-speed"-tool-changer with 24+1 magazine spaces, rapid traverse speeds up to 1,400 ipm, rigid tapping and 55-gallons cooling system with continuous coolant supply, additional coolant filter system.

We redirect our productivity for you.

With the HAAS Super-Speed machining center, we are not only able to deliver turned and milled parts with gears completely from a single source, but also quickly, efficiently and with the usual highest quality from Gleser. By additional coolant filtration systems, we are making an important contribution to environmental protection.